Laying sod, regardless of if it is for a new lawn or for a lawn that is being renovated, requires careful attention to ensure it is handled and installed properly. Sod is usually sold in large sections or in a roll that has to be cut to size to fit the various areas in the lawn. If the sod is not laid properly, it may not grow. As a result, the tips here can prove beneficial when it comes to SOD Installation in Annapolis MD.
Measure Carefully
Be sure to take measurements of the area that is going to be sodded with a yardstick or tape measurer. Remember, sod is more expensive than seeding the lawn, so only purchase what is needed to cover the desired area fully. Make sure that the right type of grass is purchased for the area, as well.
Prepare the Soil
Sod needs to be laid right away after it arrives. As a result, all the preparatory work needs to be done before the delivery. It is a good idea to use a rototiller or a spade in the desired area at a depth of about six inches. Also, remove any debris from the area, including roots, wood, and rocks. Also, level the area with a rake and make sure it is approximately one inch below any sprinkler heads, sidewalks, or driveways.
Install the Sod Properly
When it comes to SOD Installation in Annapolis MD, there are a few things that can go wrong. One of the biggest mistakes is not laying it properly. Sod needs to be placed in a straight line, and the edges of the pieces should be pushed together without overlapping. This will provide the best coverage for the area.
When it comes to laying sod, this is often a DIY project for homeowners. However, for those who are unsure if they can do it properly or just want help from the pros, they can call to schedule an appointment. Making sure sod is laid and installed properly will give it the best chance possible of growing successfully and covering the entire area.
