Sealcoating Driveways in Madison, WI Improves the Surface Layer

Owning a home has many benefits, but there are also a lot of maintenance issues that must be attended to on a regular basis. A homeowner needs to keep up with everything on the inside of a home as well as maintaining the outside of the home. Sealcoating Driveways in Madison WI may be necessary at some point to keep the driveway surface smooth and attractive.

Driveway Sealing

The purpose for sealcoating driveways in Madison WI is to keep the surface of a driveway free of cracks and bumps. An asphalt sealant can extend the life of a driveway’s surface by providing a barrier that will keep water, ice, and chemicals from damaging the driveway’s surface. Over time, moisture and chemicals can erode and stain a driveway, making it less than desirable to look at and difficult to drive on.

How it Works

A driveway sealer can be applied as an overlay, meaning that it can adhere to the existing surface layer. The process may involve filling in holes and cracks beforehand as well as cleaning the surface before the sealer is applied. This will create a layer that the sealant can readily bond with. As the new asphalt fuses together with the older surface, it will create a new top layer that is smooth and resistant to the outside elements and chemicals that may spill on it.

Why Seal a Driveway

Sealcoating a driveway stops damage from spreading in areas where the driveway surface has developed cracks and bumps. By applying a new top layer, a homeowner may be able to avoid having to do a complete driveway overhaul, which could involve completely removing the old driveway and putting down a new one. Sealcoating adds a barrier of protection to the driveway pavement while strengthening the existing surface at the same time.

When to Apply a Sealer

Asphalt driveways should be resealed every three years for maximum benefits. The surface should be repaired, cured, and thoroughly cleaned before an overlay is poured. After the new surface has been put down, the driveway should remain untouched for 48 to 72 hours to allow it to properly cure.

Applying new asphalt to a driveway can enhance a home’s appeal. It can make it nicer to drive on. For more information regarding driveway resurfacing, please click here.


Follow Us:

Author: Myrtice Lovett

Share This Post On