Variation in weather patterns call for regulation of temperatures in homes and offices, either by cooling or heating. Other than installing two separate systems to cool and heat, heat pump can perform both functions. It uses a little amount of energy to pull heat from the air, and can equally be reversed to cool a building. A heat pump operates the same way as the standard heating, ventilating and air conditioning unit. It is, however, more efficient as it only transfers energy. Just like any other electrical appliance, heat pump is subject to destruction. Any defective problems should be handled by a qualified technician in heat pumps in Tacoma WA.
There are different types of heat pumps. Some of them include:
* Absorption heat pump: mostly used in industries. The energy used in its operation is absorbed from the heat released during industrial processes
* Solar heat pump: it is a green technology pump that uses solar energy that is trapped by solar panels to power a standard or even geothermal heat pump
* Dual fuel heat pump: it uses a heat pump in warm or moderate temperatures and a gas furnace during cold periods
* Air source heat pump: its outdoor unit uses air as its principal medium for heat exchange
* Water source heat pump: its outdoor unit uses water or glycol as a medium for heat exchange
* Window heat pump: it relies on electric heating for more rigid temperatures (below -1 degrees Celsius)
* Mini split and ductless heat pumps: contain many indoor units that split one outdoor unit. The refrigerate piping is routed to each section.
In the event of any defect, seek the services of a qualified expert in Heat pumps in Tacoma WA. The technician understands the operating mechanism of the pump and is capable of checking both the suction and discharge pressures, as well as suction gas super heat. The technician will advise you on the right amount of refrigerant that should be maintained in the system. Checking of the thermostat may not be easy for you, but a technician will be able to tell or adjust it so that cooling and heating are done interchangeably. Lastly, a technician will also perform proper management practices like checking the air flow and leakage, greasing and tightening all electrical connections.
