Thanks to typical climate conditions during the summer, every homeowner likely has the phone number for a company specializing in AC repair in Cypress, TX, as no one wants to find their AC has stopped working on the hottest day of the year. Before anyone calls in the firm specializing in AC repair in Cypress, TX, however, they should take the time to do some basic troubleshooting. Often, this is enough to resolve the problem, not only saving the homeowner money, but also reducing the discomfort one experiences when the AC isn’t working. Here are some simple steps one should take before calling in the repair firm.
1. Check to ensure the filter isn’t clogged, as a dirty filter can prevent the home from cooling properly. If the unit has frozen up, it will need to be turned off for a few hours to allow any ice to thaw. In addition, a brush may be needed to clean the condenser fins found inside the unit, and a special brush will need to be purchased for this purpose. Cleaning the fins can solve many AC cooling problems.
2. Look to see if the unit is getting power. If there is a problem within the AC system, the breaker may be tripped. The same is true if the breaker inside the electrical box is going bad. An electrician will need to be called in to replace the breaker, yet he or she may be able to come in sooner than an AC company, especially on the hottest days of the year.
3. Some units come with a condensate pump. If you have a unit with this type of pump, you’ll need to make sure the reservoir isn’t full. If it is, the limit switch may be tripped, causing the unit to stop running. Drain the reservoir and, if this doesn’t work, the pump will need to be repaired or replaced by a professional technician.
Visit website to learn more about basic troubleshooting of an AC unit. Many problems can easily be fixed without the need for calling in the professionals. Take the time to complete these steps to save time, money, and a lot of frustration.
